130
Analog Output Units Section 5-2
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
5-2-2 GT1-DA04MX
General Specifications
(Unit: mm)
Approx. 80
Item Specification
I/O connections Connectors (made by MOLEX)
Number of outputs 4 outputs (allocated four words in the Master Unit)
Internal
power sup-
ply
Voltage range
20.4 to 26.4 VDC (24 VDC
+10%
/
–15%
)
Current consump-
tion in Unit (inrush
current)
100 mA max.
(inrush current 30 A max.)
Current consumption
(I/O Unit interface)
50 mA max.
Noise immunity ±2000 V
(IEC61000-4-4 via fast transient noise simulator)
Vibration resistance
10 to 150 Hz, 1.0-mm double amplitude or 70 m/s
2
Shock resistance
200 m/s
2
Ambient temperature –10°C to 55°C
Ambient humidity 25% to 85% (with no condensation)
Operating atmosphere No corrosive gases
Storage temperature –25°C to 65°C
Safety standards UL508, CSA22.2
EMC directives EN50081-2, EN50082-2
Mounting DIN 35-mm track
Weight Approx. 180 g
To Next Page
Loading...
