78
Transistor Output Units Section 4-4
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
4-4-6 GT1-OD16ML-1 Transistor Output Unit with Connector (PNP)
Output Specifications
Components
(Unit: mm)
Approx. 59
Item Specifications
Number of outputs 16 points
Current per common With connectors: 2 A max.
With terminal block: 2.5 A max.
Digital Output Connector
(made by FUJITSU)
Connects to the output devices, such as
relays and solenoids, via an I/O Block or a
Connector-Terminal Block Conversion Unit.
DIN Track Mounting HookTerminal Block
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
TS Indicator
I/O Unit Interface
Communications Connector 2
(on the terminator side)
Output Indicators
Display the status of the outputs.
Lit when an output is ON.
(Refer to page 200.)
To Next Page
Loading...
