Omron DEVICENET#05-2003 - GT1-ID16 ML Transistor Input Unit with Connector (NPN)

52
Transistor Input Units Section 4-3
Wiring Examples
Note V terminals and V connector pins, as well as G terminals and G connector
pins, are internally connected. When the I/O power is being supplied from a
terminal block, the power can be supplied to the input devices from the V and
G connectors. Current supplied in this way, however, must be less than 1 A.
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
4-3-5 GT1-ID16ML Transistor Input Unit with Connector (NPN)
Input Specifications
Note The number of input points that can be ON simultaneously depends
on the ambient temperature, as shown below.
Wire colors in parentheses are the previous JIS colors
for photoelectric and proximity sensors.
I/O power
supply
NPN output
3-wire sensor
(photoelectric or
proximity sensor)
2-wire sensor
(limit switch)
Bro
w
n
(red)
Black
(
w
hite)
Blue
(black)
Brown
(w
hite)
Blue
(black)
+ −
(Unit: mm)
Approx. 70
Item Specifications
Number of input points 16 points
Number of points that can be ON simultaneously 16 points max.
Max. No. of input points
Ambient temperature (°C)