55
Transistor Input Units Section 4-3
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
4-3-6 GT1-ID16ML-1 Transistor Input Unit with Connector (PNP)
Input Specifications
Note The number of input points that can be ON simultaneously depends
on the ambient temperature, as shown below.
Components
(Unit: mm)
Approx. 59
Item Specifications
Number of input points 16 points
Number of points that can be ON simultaneously 16 points max.
Max. No. of input points
Ambient temperature (°C)
Digital Input Connector
(made by FUJITSU)
Connects to input devices, such as
switches and sensors, via an I/O Block
or a Connector-Terminal Block
Conversion Unit.
DIN Track Mounting HookTerminal Block
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
TS Indicator
Input Indicators
Display the status of the inputs.
Lit when an input is ON.
I/O Unit Interface
Communications Connector 2
(on the terminator side)
(Refer to page 200.)
To Next Page
Loading...
