50
Transistor Input Units Section 4-3
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
4-3-4 GT1-ID16MX-1 Transistor Input Unit with Connector (PNP)
Input Specifications
Components
(Unit: mm)
Approx. 70
110
60
65
4
27.6
37.4
12.6
35
Item Specifications
Number of input points 16 points
Number of points that can be ON simultaneously 16 points max.
Terminal Block DIN Track Mounting Hook
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
TS Indicator
Input Indicators
Display the status of the inputs.
Lit when an input is ON.
I/O Unit Interface
Communications Connector 2
(on the terminator side)
Digital Input Connectors
(made by MOLEX)
Connect to input devices, such
as switches and sensors.
(Refer to page 200.)
To Next Page
Loading...
