Omron DEVICENET#05-2003 - Slave Device Profiles; Appendices

209
Appendix A
Slave Device Profiles
Refer to the Slave specifications and Device profiles in this manual when connecting an OMRON Slave Unit to
another company’s Master.
DRT1-COM Communications Unit Device Profile
Object Mounting
Identity Object (0x01)
General data Compatible DeviceNet Specifications Volume I - Release 1.3
Volume II - Release 1.3
Vendor name OMRON Corporation Vendor ID = 47
Device type name Slaves:
Communication adapter
Device type number = 12
Manufacturer catalog number Manual number (W267)
Manufacturer revision 1.0
Physical conform-
ance data
Network current consumption 24 VDC at 30 mA max.
Connector type Open plug
Physical insulation Yes
Supported indicators Module, Network
MAC ID setting DIP switch
Default MAC ID 0
Baud rate setting DIP switch
Supported baud rates 125 kbps, 250 kbps, and 500 kbps
Communications
data
Predefined Master/Slave connection set Group 2 only server
Dynamic connection support (UCMM) No
Explicit message fragmentation support Yes
Object class Attribute Not supported
Service Not supported
Item ID content Get (read) Set (write) Value
Object instance Attribute 1 Vendor Yes No 47
2 Product type Yes No 12
3 Product code Yes No 306
4 Revision Yes No 1.3
5 Status (bits supported) Yes No Bit 0 only
6 Serial number Yes No Unique for each Unit
7 Product name Yes No DRT1-COM
8 State NoNo---
Item DeviceNet service Parameter option
Object instance Service 05 Reset No
0E Get_Attribute_Single No