Omron DEVICENET#05-2003 - Page 220

213
Slave Device Profiles Appendix A
Note The values for produced connection size and consumed connection size will be the respective totals for
all the I/O Units connected to the Communications Unit. The following table lists the values for each I/O
Unit. Only the following Units are applicable because the Bit Strobed I/O is valid only when OUT is 0
bytes and IN is 8 bytes or less.
Item Section Information Max. number of instances
Object instance 3 Instance type Bit strobed I/O 1
Production trigger Cyclic ---
Transport type Server ---
Transport class 2 ---
Item ID content Get
(read)
Set
(write)
Value
Object instance 3 Attribute 1 State Yes No ---
2 Instance type Yes No 0100 Hex
3 Transport class trigger Yes No 8200 Hex
4 Produced connection ID Yes No ---
5 Consumed connection ID Yes No ---
6 Initial comm. characteristics Yes No 0100 Hex
7 Produced connection size Yes No See note.
8 Consumed connection size Yes No 0800 Hex
9 Expected packet rate Yes Yes ---
12 Watchdog time-out action Yes No 0000 Hex
13 Produced connection path length Yes No 0000 Hex
14 Produced connection path Yes No No
15 Consumed connection path length Yes No 0000 Hex
16 Consumed connection path Yes No No
17 Production inhibit time Yes No 0000 Hex
Item DeviceNet service Parameter option
Object instance 3 Service 0E Get_Attribute_Single No
10 Set_Attribute_Single No
Model Produced connection size
DRT1-COM 0400 Hex
GT1-ID16(-1) 0200 Hex
GT1-ID16MX(-1) 0200 Hex
GT1-ID16ML(-1) 0200 Hex
GT1-ID16DS(-1) 0200 Hex
GT1-ID32ML(-1) 0400 Hex
GT1-AD04 0800 Hex
GT1-AD08MX (set for 4 inputs) 0800 Hex
GT1-AD08MX (set for 8 inputs) 1000 Hex
GT1-TS04T/P (Normal Mode) 0800 Hex
GT1-TS04T/P (2-decimal-place
Mode)
1000 Hex