59
Transistor Input Units Section 4-3
Connector Pin Arrangement
Wiring Attach a 25-pin D-sub connector to the Transistor Input Unit and connect it to
the external devices.
Applicable Connectors
When creating your own cables, use one of the following connectors.
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Pin
number
Function
Pin
number
Function
1312111098765 4321
NC NC NC V
G
IN IN IN ININ IN IN IN
06 05 04 03 01 000207
25 24 23 22 21 20 19 18 17 16 15 14
NC NC V
G
IN IN IN ININ IN IN IN
14 13 12 11 09 081015
Manufacturer Model number Remarks
OMRON XW2S-2513 Hood
XW2A-2501 Plug
(Unit: mm)
Approx. 59
To Next Page
Loading...
