74
Transistor Output Units Section 4-4
Internal Circuits
Terminal Arrangement
Connector Pin Arrangement
The following diagram shows the pin arrangement for the connector.
Wiring Attach MOLEX connectors to the Transistor Output Unit and connect them to
external devices.
Applicable Connectors
V (Terminal block)
V (Connector)
G (Terminal block)
G (Connector)
Photo-
coupler
Low voltage
Internal circuits
Output 0
(Connector)
V (Connector)
Output 1
(Connector)
G (Connector)
Drive power
supply
Photo-
coupler
Drive
power
supply
Drive
power
supply
Output
Output
Signal
Manufac-
turer
Connector Model number Remarks
MOLEX Pressure-
welded
Housing 521-09-0390 For AWG#24
Crimp Housing 50-57-9403 ---
Reeled contacts 16-02-0069 For AWG#24 to 30
16-02-0086 For AWG#22 to 24
Loose contacts 16-02-0096 For AWG#24 to 30
16-02-0102 For AWG#22 to 24
Crimping tool 570-36-5000 For AWG#22 to 26
11-01-0209 For AWG#24 to 30
To Next Page
Loading...
