84
Transistor Output Units Section 4-4
Connector Pin Arrangement
Wiring
Attach a 25-pin D-sub connector to the Transistor Output Unit and connect it
to external devices.
Applicable Connectors
When creating your own cables, use one of the following connectors.
Note V terminals and G terminals are internally connected. When the I/O power is
being supplied, the power can be supplied to the output devices from the V
and G connectors. Current supplied in this way, however, must be less than
2.5 A.
Dimensions
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Pin number
Function
Pin number
Function
13 12 11 10 9 8 7 6 5 4 3 2 1
NC NC NC V
G
OUT OUT OUT OUTOUT OUT OUT OUT
06 05 04 03 01 000207
25 24 23 22 21 20 19 18 17 16 15 14
NC NC V
G
OUT OUT OUT OUTOUT OUT OUT OUT
14 13 12 11 09 081015
Manufacturer Model number Remarks
OMRON XW2S-2513 Hood
XW2A-2501 Plug
(Unit: mm)
Approx. 59
To Next Page
Loading...
