Omron E5AC-T User Manual

6 Parameters
6 - 74
E5@C-T Digital Temperature Controllers User’s Manual (H185)
eV-1
Event Input Assignment 1 There must be event inputs.
eV-2
Event Input Assignment 2
eV-3
Event Input Assignment 3
eV-4
Event Input Assignment 4
eV-5
Event Input Assignment 5
eV-6
Event Input Assignment 6
• The following functions can be assigned to event inputs 1 to 6.
• Run (OFF)/Reset (ON)
• Run (ON)/Reset (OFF)
• Auto/Manual
• Reset
• Run
• Hold/Clear Hold
• Hold
• Advance
• Program Number Switch 0 to 2
• Direct/Reverse Operation
• Program SP Mode/Fixed SP Mode
• 100% AT Execute/Cancel
• 40% AT Execute/Cancel
• All PID 100% AT Execute/Cancel
• All PID 40% AT Execute/Cancel
• Setting Change Enable/Disable
• Communications Writing Enable/Disable
• Alarm Latch Cancel
• Wait Enable (ON)/Disable (OFF)
Function
• Default:
Event Input Assignment 1: rr-1
Event Input Assignment 2: adv
Event Input Assignment 3: none
Event Input Assignment 4: none
Event Input Assignment 5: none
Event Input Assignment 6: none

Omron E5AC-T Specifications

General

Brand	Omron
Model	E5AC-T
Category	Temperature Controller
Language	English