131
Using Banks and PID Sets Section 4-15
Note When the PID Set Automatic Hysteresis parameter is set to DV, the
default setting becomes %FS.
Parameter Setting range Unit Default
Bank * PID Set No.
*: 0 to 7
0: Automatic selection
1 to 7: PID Set No. 1 to 7
--- 1
PID *Automatic
Selection Range
Upper Limit
*: 1 to 8
Temperature: −19,999 to
32,400
1320.0 EU
Analog: −5.0 to 105.0 105.0 % (See note.)
PID Set Automatic
Setting Data
PV: Process value
DV: Derivative value
SP: Set point
PV None
PID Set Automatic
Hysteresis
0.10 to 99.99 0.50 %FS
To Next Page
Loading...
