Omron E5AZ - Selecting the Temperature Unit; Temperature Unit

28
Selecting the Temperature Unit Section 3-3
3-3 Selecting the Temperature Unit
3-3-1 Temperature Unit
• Select either “°C” or “°F” as the temperature unit.
• Set the temperature unit in the “temperature unit” parameter of “initial set-
ting level”. Default is “c:
°C”.
Select “
°C”.
1,2,3... 1. Press the key for at least three seconds to move from the “operation
level” to the “initial setting level”.
2. Select the “temperature unit” parameter by pressing the key.
Press the or key to select either “
°C” or “°F”.
c :
°C f : °F
3. To return to the “operation level” press the key for at least one second.
Operation Procedure
Operation level
30
0
C
Input type
Initial setting level
Temperature unit
in-t
5
d-u
c