Omron E5AZ - Event Inputs and Multi-SP Functionality

44
Alarm Outputs Section 3-9
1,2,3... 1. Press the key for at least 3 seconds, switching from the "operation lev-
el" to the "initial setting level".
2. Press the key to select the "advanced function setting level". Switch
to the advanced function setting level.
3. Use the keys to set the parameter to "
−169".Enter the advanced
function setting level.
4. To set "alarm1 ON delay" press the key and select the "alarm 1 ON
delay" parameter.
5. Use the key to set 10 second (delay).
Initial setting level
in-t
5
Input level
Advanced function setting level
Switch to
advanced function
setting level
Alarm 1
ON delay
amoV
0
amoV
-169
init
off
a1on
0
C
a1on
10
C