x
CAUTION
Loose screws may occasionally result in fire.
Tighten terminal screws to the specified torque of 0.74 to
0.90 N
⋅m.
Unexpected operation may result in equipment damage or
accidents if the settings are not appropriate for the controlled
system. Set the Temperature Controller as follows:
A malfunction in the Temperature Controller may occasionally
make control operations impossible or prevent alarm outputs,
resulting in property damage.
To maintain safety in the event of malfunction of the Temperature
Controller, take appropriate safety measures, such as installing a
monitoring device on a separate line.
Be sure that the platinum resistance thermometer type and the
input type set on the Temperature Controller are the same.
To Next Page
Loading...
Need help?
General
