Omron E5CJ-R2 User Manual

34
4-3-6 Startup
Startup means that the Temperature Controller starts operating. The following
conditions are required to operate the Temperature Controller.
• The Temperature Controller must be turned ON.
• No sensor error has occurred.
• If a model with event input 2 is used, event input 2 must be set to RUN.
Event input 2 is set to RUN before shipping.
The Temperature Controller will not start operating until all the above conditions
are satisfied.
Terminology
Section 4-3

Omron E5CJ-R2 Specifications

General

Brand	Omron
Model	E5CJ-R2
Category	Temperature Controller
Language	English