Omron F3SJ-B Series - Canadian Standards; SEMI Standards; JIS Standards

96
Chapter6 Related Standards
F3SJ-B
User’s Manual
Appendix
• ANSI B11.12: 2005 Roll forming and roll bending machines
• ANSI B11.13: 1992 (R2007) Single- and multiple-spindle automatic bar and chucking machines
• ANSI B11.15: 2001 Pipe, tube, and shape bending machines
• ANSI B11.16: 2003 (R2009) Metal powder compacting presses
• ANSI B11.17: 2004 (R2009) Horizontal hydraulic extrusion presses
• ANSI B11.18: 2006 Machines and machinery systems for processing strip, sheet or plate from coiled
configuration
• ANSI B11.19: 2003 (R2009) Performance criteria for the design, construction, care, and operation of
safeguarding when referenced by the other B11 machine tool safety standards
• ANSI/RIA 15.06: 1999 (R2009) Industrial robots & robot systems safety requirements
• UL 1998: 1998 Safety-related software
• UL 508: 1999 Industrial control equipment
• UL 61496-1: 2002 Electro-sensitive protective equipment - Part 1: General requirements and tests
• UL 61496-2: 2002 Electro-sensitive protective equipment - Part 2: Particular requirements for active
optoelectronic protective devices
 Canadian Standards
• CAN/CSA C22.2 No.14 Industrial control equipment
• CAN/CSA C22.2 No.08 Electronics integrated safety functions
• CSA Z142 Code for power press operation: Health, safety, and guarding requirements
• CSA Z432 Safeguarding of machinery
• CSA Z434 Industrial robots and robot systems : General safety requirements
 SEMI Standards
• SEMI S2-0706 Environmental, health, and safety guideline for semiconductor manufacturing equipment
 JIS Standards
• JIS B 9704-1: 2015 Safety of machinery - Electro-sensitive protective equipment - Part 1 : General requirements
and tests
• JIS B 9704-2: 2008 Safety of machinery - Electro-sensitive protective equipment - Part 2 : Particular
requirements for equipment using active opto-electronic protective devices