Omron F3SJ-B Series User Manual

68
Chapter3 Wiring
F3SJ-B
User’s Manual
Wiring/Installation
 Simple Wiring Connector System
A combination of a double-ended cable for an emitter (F39-JDB-L), a single-ended cable for a
receiver (F39-JDA-D), and a simple wiring connector (optional: F39-CN5) can be used for a simple
wiring system.
 Cable for simple wiring (optional: F39-JDBA)
A set of two cables; a double-ended cable for an emitter (F39-JDB) and a single-ended cable for a
receiver (F39-JDA-D). Used in combination with a simple wiring connector (optional: F39-CN5).
See the following page for details of a double-ended cable for an emitter (F39-JDB-L) and a single-
ended cable for a receiver (F39-JDA-D).
Double-ended connector cable p.67
Single-ended connector cable p.66
The cable can be used by connecting it to the F39-JDB-L Double-end Connector Cable for emitter to
the receiver.
For wiring, refer to the following page.
Using a simple wiring connector for F3SJ-B p.75
 Simple wiring connector (optional: F39-CN5)
F3SJ
Receiver
F3SJ
Emitter
Simple Wiring
Connector
F39-CN5
Cable with connectors on both ends
F39-JD B-L (grey)
Cable with connector on one end
F39-JD A-D (black)
24.7
12
13.6 13.6
φ8(SPOTFACING2)
φ4.5
(52)
32.1
10
17.7
18

Omron F3SJ-B Series Specifications

General

Brand	Omron
Model	F3SJ-B Series
Category	Industrial Electrical
Language	English