Omron F3SJ-B Series User Manual

vii
F3SJ-B
User’s Manual
Introduction
E
Other
To use the F3SJ-B in PSDI mode (Reinitiation of cyclic operation by the protective equipment),
you must configure an appropriate circuit between the F3SJ-B and the machine. For details
about PSDI, refer to OSHA1910.217, IEC 61496-1, and other relevant standards and
regulations.
Do not try to disassemble, repair, or modify this product. Doing so may cause the safety functions
to stop working properly.
Do not use the F3SJ-B in environments where flammable or explosive gases are present. Doing
so may result in explosion.
Perform daily and 6-month inspections for the F3SJ-B. Otherwise, the system may fail to work
properly, resulting in serious injury.
Do not use radio equipment such as cellular phones, walkie-talkies, or transceivers near the
F3SJ-B.

Omron F3SJ-B Series Specifications

General

Brand	Omron
Model	F3SJ-B Series
Category	Industrial Electrical
Language	English