Omron FQ2-S Series - Page 184

Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
182
FQ2-S/CH User’s Manual
for Communications Settings
Save setting data
commands
LASTIMAGESAVE LIS Saves the latest input image to the
SD card inserted in the Touch Finder
as ifz data.
p.346
LOGDATASAVE LDS Saves measurement data saved in
the Sensor’s memory by the logging
function to the SD card inserted in
the Touch Finder as csv data.
p.347
TOTALDATASAVE TDS Saves statistical data saved in the
Sensor’s memory by the logging
function to the SD card inserted in
the Touch Finder as csv data.
p.348
Type of command Command Abbreviation Function Reference
FQ2-S_CH_comm.book 182 ページ ２０１４年６月２６日 木曜日 午前１１時４７分