Omron FQ2-S Series - Page 330

Command Control
328
FQ2-S/CH User’s Manual
for Communications Settings
SYSDATA or SD
Set System Data
Sets the value to the specified system data.
System data numbers and details: p. 222
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
System data number* Specifies the number that corresponds to the system data to be set.
Setting value Specifies the setting value to be set to the system data.
SY A T A CR SD
System data number
(3 digits max.)
Setting value
(5 digits max.)Command
Space
(0x20)
Space
(0x20)
Delimiter
Delimiter
Command
or
DS
System data
number
(3 digits max.)
Setting value
(5 digits max.)
CR
Space
(0x20)
Space
(0x20)
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 328 ページ ２０１４年６月２６日 木曜日 午前１１時４７分