Omron FQ2-S4 - Page 424

Controlling Operation and Outputting Data with TCP No-protocol Communications
422
FQ2-S4 User’s Manual
● ITEMDATA or ID
Acquire Inspection Item Data
This command acquires the parameters and measurement values of the specified inspection item.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Inspection item number Specifies the inspection item number. (0 to 31)
External reference data
number
Specifies the external reference data number. (0 to 9999)
12-2 External Reference Parameters: p. 491
Acquired value Returns the data for the specified inspection item.
12-2 External Reference Parameters: p. 491
IT DATA
CR
EM
Inspection item number
(2 digits max.)
Command
Space
(0x20)
Space
(0x20)
Delimiter
Command
or
DI CR
Delimiter
Space
(0x20)
Space
(0x20)
External reference
data number
(4 digits max.)
Inspection item
number
(2 digits max.)
External reference
data number
(4 digits max.)
CR
Acquired
value
Delimiter
CR OK
CR ER
Delimiter