Omron FQ2-S4 - Controlling Operation and Outputting Data with FINS;TCP No-protocol Commands

Controlling Operation and Outputting Data with TCP No-protocol Communications
428
FQ2-S4 User’s Manual
● ERRGET
Acquire Error Information
This command acquires the latest error code from the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Error code Returns the latest error code. If there is no error history, the response is 00000000.
11-1 Error Histories: p. 452
ER CR RG TE
Command
Delimiter
00 0 CR 00 000
Delimiter
Model
CR OK
Delimiter
CR ER
Delimiter