Omron FQ2 Series User Manual

6
2.2. Target Readers and Required Skills
The target readers of this manual and target users of FQ2 Simulator are people who are in
charge of the operation or management of FQ2 Smart Camera series. For operation and more
detailed information about the FQ2 sensor, please refer to the user's manual of Smart Camera
FQ2-S/CH Series.
Installation of FQ2 Simulator requires an internet connection and the user rights of an admin-
istrator of the destination computer. Please make sure to provide them prior to the installation.
2.3. Description of Terms
Term Description
FQ2 Simulator Software to simulate the operation of the FQ2 sensor on
computers without using an actual FQ2 sensor.
FQ2 Smart Camera series Vision sensor with integrated camera and controller.
The lineup includes FQ2-S1, S2, S3, S4, FQ2-S4, CH.
It can easily realize simple inspections, measurements,
and scanning/matching of ID, etc. It may also be called
the FQ2 sensor in this manual.
TouchFinder Used for confirmation of images and setting of judgment
conditions.Also used to save inspection results or to con-
firm the status of operation during runtime.
PC Tool (TouchFinder for PC) Setting tool of the FQ2 sensors that can be used on a
computer with the same functions as Touch Finder. It is
available for free for registered customers. It is also called
TouchFinder for PC, or PC-Tool for FQ, etc.

Omron FQ2 Series Specifications

General

Manufacturer	Omron
Type	Security Camera
Series	FQ2 Series
Sensor Type	CMOS
Communication Interface	Ethernet, RS-232C
Lens Mount	C-mount
Protection Structure	IP67
Category	Security Camera