75
2. Press the Mode Key to display the stine startup compensation time setting.
Set Value LED Display Model Basic Model
3. Press the Shift Key to display the prior set value 00.0 for changing. The
PROG indicator will flash.
Set Value LED Display Model Basic Model
4. Press the Up and Shift Keys to set the value to 02.0. The setting will be vali-
dated automatically if no change is made for five seconds. The stine start-
up compensation time setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model Basic Model
When no operation is executed for five seconds
Set Value LED Display Model Basic Model
Setting Mode
Section 4-2
To Next Page
Loading...
Need help?
General
