Omron K3NR User Manual

76
Power Failure Memory
Retains the process value at the time of power failure if the operating mode of the
K3NR is set to F7 (pulse counting).
Setting Default
on: Stored
off: Not Stored
off
Follow the steps described below to set on to enable power failure memory.
Set Value LED Display Model Basic Model
1, 2, 3... 1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg average processing setting will appear.
Set Value LED Display Model Basic Model
2. Repeatedly press the Mode Key until the memo power failure memory setting
is displayed.
Set Value LED Display Model Basic Model
3. Press the Shift Key to display the set data off for changing. The PROG indi-
cator will flash.
Set Value LED Display Model Basic Model
4. Press the Up Key to display on. The setting will be validated automatically if
no change is made for five seconds. The memo power failure memory setting
will be displayed again.
Note Press the Mode Key to enter the displayed setting immediately. The
next parameter will be displayed for setting.
Set Value LED Display Model Basic Model
memo
FUNCTION
SETTING
SETTING
EXAMPLE
Setting Mode
Section 4-2

Omron K3NR Specifications

General

Brand	Omron
Model	K3NR
Category	Measuring Instruments
Language	English