85
6. Press the Shift Key to display the prior set value Ć199.99 for changing. The
PROG indicator will flash.
Set Value LED Display Model Basic Model
7. Press the Up and Shift Keys to set the value to 000.00. The setting will be
validated automatically if no change is made for five seconds. The lset.l L
linear output range setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model Basic Model
When no operation is executed for five seconds
Set Value LED Display Model Basic Model
Setting Mode
Section 4-2
To Next Page
Loading...
Need help?
General
