103
Standard Target Function Section 5-2
• The following status information can be included in I/O data when the I/O
type of the Target I/O is input.
• General Status
• Local Input Status
• Local Output Status
• Test Output/Muting Lamp Status
• Local Input Monitor
• Local Output Monitor
• When the I/O type of a Target I/O is Target IN, data for communications
between this Unit and a Safety Slave performing DeviceNet Safety com-
munications can be included in the I/O data.
IMPORTANT When connected to an OMRON CS/CJ-series EtherNet/IP Communications
Unit, I/O communications for EtherNet/IP are set in 2-byte increments. When
creating an odd number of bytes of I/O data, add one byte to the I/O tag to
make it an even number.
To Next Page
Loading...
