Omron NE1A-SCPU01 - 07-2009 - Function Block Editing; Function Block Parameter Settings

104
Standard Target Function Section 5-2
Setting Target I/O
Set the Target I/O as follows:
1. Select the connection type.
2. Set the I/O tags.
3. Set additional status.
4. Set additional local I/O monitor data.
5. Set Safety I/O routing.
IMPORTANT If Safety Input Slave data is to be handled by the Originator using Target I/O
communications, the data must be set for DeviceNet Safety I/O communica-
tions. For details on making the settings, refer to 4-4-2 Safety I/O Connection
Settings.
Target I/O
NE1A (Standard Target)
Connection
IN
Status A
Status B
Input data
Output data
OUT
User
program
Status data
Connection
Connection
Safety Input Slave
Safety Input Slave
Data A
Data B
Data C
Data D
Safety Input Slave data
Data A
Data D
Slave data A1
Slave data D2