Omron NJ Series Startup Guide

4 Click the Generate Auto Module button in the Save Configuration tab page.
The module name auto is added to the module list in the Save Configuration tab page. In the
tree of the Multiview Explorer
, V+ Modules - auto are added under Programming.
5 Select Save from the
File menu.
3 Implementation Example of Static Pick-and-place Equipment
3-69
NJ-series Robot Integrated System Startup Guide (O049)
3-3 Programming and Simulation Procedures
3
3-3-8 Setting up Automatic Loading of V+ Programs and Variables at Power ON

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model