Additional Information
When the Move icon is hidden, click the 3D shape data to display it.
5 Right-click the 3D shape data you are moving in the 3D Visualizer.
The menu commands are displayed.
6 Select Edit Workspace Position from the menu to clear the selection.
7 Right-click the 3D shape data in the 3D Visualizer.
The menu commands are displayed.
8 Select Edit W
orkspace Orientation from the menu.
3 Implementation Example of Static Pick-and-place Equipment
3-44
NJ-series Robot Integrated System Startup Guide (O049)
To Next Page
Loading...
