Omron ns series User Manual

3-1 Starting and Exiting
16
3-1 Starting and Exiting
■
Starting the I/O Comment Extracting Tool
Use the following procedure to start I/O Comment Extracting Tool.
Click the Start Button on the task bar, and select Programs – OMRON – I/O
Comment Extracting Tool – I/O Comment Extracting Tool. (This command
assumes that the program has been installed in the I/O Comment Extracting Tool
group.)
The Initial Screen of I/O Comment Extracting Tool will be displayed.
■
Exiting the I/O Comment Extracting Tool
Use the following procedure to exit the I/O Comment Extracting Tool.
1. Click the Exit Button on the Initial Screen of the I/O Comment Extracting Tool.
2. A confirmation dialog box will be displayed. Click the OK Button.
The I/O Comment Extracting Tool will be ended.

Omron ns series Specifications

General

Backlight	LED
Power Supply	24 VDC
Display Type	TFT LCD
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Interface	Ethernet, USB
Memory	Varies by model
Operating Temperature	0 to 50°C
Protection Level	IP65 (front panel)
Storage Temperature	-20 to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s²
Power Consumption	Varies by model