Omron ns series User Manual

3-12 Starting the Programming Console
3-12-3 Prohibiting Programming Console Startup
87
When the Programming Console function starts, the mode selection keys are locked. If
the RUN, MONITOR, or PROGRAM mode selection key is pressed in the lock OFF
status, the mode will changes and the mode selection keys will be locked.
•
Lock OFF
MONITOR
RUN PROGRAM
MONITOR
RUN PROGRAM
MONITOR
RUN PROGRAM
RUN mode
MONITOR mode
PROGRAM mode
•
Lock ON
3-12-3 Prohibiting Programming Console Startup
Starting the Programming Console from the Ladder Monitor screens can be enabled or
disabled.
1. Press the Menu Button and select Various Settings from the menu.
2. Select Prog Console Setting from the Various Settings Dialog Box.
• Press the Enable Button to allow the Programming Console to be started.
• Press the Disable Button to prohibit the Programming Console from being started
and to remove that option from the menu for the Menu Button.

Omron ns series Specifications

General

Brand	Omron
Model	ns series
Category	Touch terminals
Language	English