Omron NT31 Setup Manual

148
Memory Initialization Section 6-4
Initialize the memory tables by following the menu operation from the System
Menu shown below.
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU
screen without initializing the memory tables.
On completion of memory table initialization, the message Finished is dis-
played and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Memory Table.
Select Yes.
Ver 4.12
The memory tables are initialized. During
initialization, the message Initializing is
displayed.

Omron NT31 Specifications

General

Brand	Omron
Model	NT31
Category	Touch terminals
Language	English