146
Memory Initialization Section 6-4
6-4-4 Initializing the Recipe Tables
You can initialize the recipe tables (i.e., all the recipe data) edited in the NT31/
NT31C. Here, “initializing” the recipe tables means to restore the battery
backup memory (“recipe data memory”) to the values in flash memory at that
time. If, after downloading from the Support Tool, you do not upload the data
even once, initialization will restore the initial values set using the Support
Tool. The values will not be cleared.
Initialize the recipe tables by following the menu operation from the System
Menu shown below.
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU
screen without initializing the recipe tables.
On completion of memory table initialization, the message Finished is dis-
played and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Recipe Table.
Select Yes.
Ver 4.12
The recipe tables are initialized. During
initialization, the message Initializing is
displayed.
To Next Page
Loading...
Need help?
General
