179
System Settings Section 6-9
Set the screen saver start-up time by following the menu operation from the
System Menu shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT31/
NT31C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT31/NT31C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Press [↓] (next screen) or [↑] (previous
screen) to display the second memory
switch setting screen.
Set a time in the input field to the right of
Screen Saver Start up Time.
Each of the digits can be incremented or
decremented by pressing the associated
+ and − keys.
To Next Page
Loading...
