199
System Maintenance Section 6-11
Reference: • With the NT31/NT31C, the record data can also be displayed by calling
screen No. 9001 (sort by occurrence) or screen No. 9002 (sort by fre-
quency) during the RUN mode.
• For details on the display history record function, refer to 2-15-1 Display
History Record Function in the Reference Manual.
• The order of display for sort by occurrence display (from oldest record or
from newest record) is set with the Hist. Disp. Method memory switch
(page 180).
• The printing method and other information must be set in advance with
the Printer Controller (page 173) and Print Method (page 175) memory
switches.
Display and print the display history record data by following the menu opera-
tion from the System Menu shown below.
Select Maintenance Mode.
Select Display History.
Ver 4.12
Select Sort by Occurrence or Sort by
Frequency.
If necessary, select the next or previous
screen by pressing [↓] (next screen) or [↑]
(previous screen).
The example screen to the left shows a
display for the sort by occurrence
method (from oldest record).
To Next Page
Loading...
Need help?
General
