153
Operation Modes and the System Menu
Section 6-3
Items in the System Menu
The items displayed in the system menu and their functions are as follows.
Menu Item Function
Quit Clear the System Menu screen and return to the RUN mode
screen.
Transmit Mode Display the Transmit Mode screen to allow transmission for
screen data between the Support Tool and the NT31/NT31C.
For details on transmission of screen data, refer to 6-6 “Transmit-
ting the Screen Data” (page 171).
Maintenance Mode Display the Maintenance Mode menu to allow system mainte-
nance of the NT31/NT31C, and various NT31/NT31C settings.
Expansion Mode Display the Expansion Mode menu to allow selection of the ex-
pansion functions embedded in the NT31/NT31C.
Among the expansion functions of the NT31/NT31C is the Pro-
gramming console function, which allows the NT31/NT31C to be
used as the programming console for a CS1 series CS1G/CS1H
C-series CPM1, CQM1, C200HX/HG/HE, or SRM1, and the ver-
sion display function which displays the version of system pro-
gram. For details on the programming console function, refer to
6-12 “Programming Console Function” (page 242).
Functions of the System Installer Mode
The following functions can be executed in the System Installer mode.
S Setting the display language
S Clearing and installing system programs
S Disabling/enabling display of the System Menu.
S Disabling/enabling writing to the screen data memory
S Clearing screen data
For details on these functions, refer to 6-5 “Operations in the System Installer
Mode” (page 166).
To Next Page
Loading...
Need help?
General
