166
Operations in the System Installer Mode
Section 6-5
6-5 Operations in the System Installer Mode
The following functions can be executed in the System Installer mode:
S Setting the display language (see below)
S Clearing/installing the system program (page 167)
S Disabling/enabling display of the System Menu (changing the system settings)
(page 168)
S Disabling/enabling writing to the screen data memory (changing the system set-
tings) (page 168)
S Clearing screen data (page 170)
For details on calling the System Installer mode, refer to “Calling the System In-
staller Mode” (page 156).
6-5-1 Setting the Display Language in the System Installer Mode
The first setting made in the System Installer mode is to select whether the display
language is to be English or Japanese.
Select “English” or ”Japanese”.
From here on, this manual assumes that “En-
glish” has been selected here.
The System Installer mode menu is dis-
played.
If there is no system program or the system
program has been corrupted, the message
“System Program not exist or incorrect.” is
displayed at the bottom of the screen.
To Next Page
Loading...
