165
Memory Initialization
Section 6-4
Select “Yes”.
The memory tables are initialized. During init-
ialization, the message “Initializing” is dis-
played.
S If “No” is selected, the NT31/NT31C returns to the “MEMORY INIT. MENU”
screen without initializing the memory switches.
On completion of memory switch initialization, the message “Finished” is dis-
played and the NT31/NT31C returns to the “MEMORY INIT. MENU” screen.
After initialization, the memory switch statuses are as follows.
Memory Switch Status
Start-up Wait Time 00
Key Press Sound ON
Buzzer Sound OFF
Printer Controller ESC/P
Print Method Tone (NT31C only)
Screen Saver Movement Display erased
Screen Saver Start up Time 010
Hist. Disp. Method From New Data
Resume Function OFF
Comm. Auto-return OFF
Time-out Interval 01
Retry Counts 005
Comm. A Method Host Link (communications speed = 9600 bps)
*
Comm. B Select RS-232C
Comm. B Method None
* The communication conditions for a bar code reader are initialized as follows:
Data bits: 7 bits; stop bit: 1 bit; parity: none; flow control: RS/CS.
To Next Page
Loading...
