158
Memory Initialization
Section 6-4
Select “Memory Init.”.
Select “Screen Data”.
Select “Yes”.
The screen data is cleared. During clear-
ance, the message “Erasing Now...” is dis-
played.
S If “No” is selected, the NT31/NT31C returns to the “MEMORY INIT. MENU”
screen without clearing the screen data.
On completion of screen data clearance, the NT31/NT31C returns to the
“MEMORY INIT. MENU” screen.
After the screen data has been cleared, if an attempt is made to set the
NT31/NT31C to the RUN mode before screen data has been transmitted from the
Support Tool or memory unit, an error message will be displayed and the RUN
mode will not be established.
To Next Page
Loading...
