202
Various System Settings
Section 6-9
Set the history display method by following the menu operation from the System
Menu shown below.
Select “Maintenance Mode”.
Select “Memory Switch”.
Press [ ] (next screen) or [ ] (previous
screen) to display the second memory switch
setting screen.
Press “Hist. Disp. Method” to display the re-
quired display order.
The setting option changes each time the
touch switch is pressed.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
S To confirm the settings and quit the memory switch setting screen, press the
“Quit” touch switch. The settings made last will be set and the NT31/NT31C will
return to the “MAINTENANCE MODE MENU” screen.
S To quit the memory switch setting screen without confirming the settings, press
the “Abort” touch switch. The NT31/NT31C will return to the “MAINTENANCE
MODE MENU” screen with the previous settings still in effect.
To Next Page
Loading...
Need help?
General
