211
Setting the Bar Code Reader Input Function
Section 6-10
Press “Quit”.
Pressing “Abort” on the communication condition/confirmation method setting
screen causes the NT31/NT31C to return to the memory switch setting screen
(4/4) without executing setting (with the previous settings still effective).
On completion of communication condition/confirmation method setting, the
NT31/NT31C returns to the memory switch setting screen (4/4).
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
S To confirm the settings and quit the memory switch setting screen, press the
“Quit” touch switch. The settings made last will be set and the NT31/NT31C will
return to the “MAINTENANCE MODE MENU” screen.
S To quit the memory switch setting screen without confirming the settings, press
the “Abort” touch switch. The NT31/NT31C will return to the “MAINTENANCE
MODE MENU” screen with the previous settings still in effect.
To Next Page
Loading...
Need help?
General
