557
Printing Data and Checking the Printer Status
Section 8-11
Reference - The NT31/NT31C continues operation even while the screen hard copy is being
printed.
- By registering a touch switch with the print stop function, it is possible to stop
printing by using this touch switch.
[Setting]
When creating a screen using the Support Tool, set the function “Print Screen” for
a touch switch, set “Start” as the function, and register the touch switch for the
screen.
If necessary, also register a touch switch for which the “Abort” function is set for
“Print Screen” for the screen.
[Operation]
(1) To start or stop screen printing, press the touch switch with the “Print Screen”
function (“Start” for starting screen printing and “Abort” for stopping screen
printing).
To Next Page
Loading...
