583
Commands/Responses
Section 9-3
Response
Only if “Yes” is set for the “Response” memory switch, the response indicated be-
low is returned on normal completion.
[Format]
1B 57
[ESC] [CR]W
3430 31 0D42
B
30
0 0 s1 s2
s
1
,s
2
: Check sum (2 hexadecimal digits)
This is always added (fixed as “14H”)
[Function]
S Writes the data of the specified number of bit memory tables, starting from the
specified bit memory table.
S A maximum of 100 tables can be written at one time.
S If numbers of table entries which is not multiple of 16 is specified, insert “0” in
remaining bit (leftmost bit).
S The number (n) of 4 hexadecimal digits value to be specified is as follows:
n=(”number of written bit memory tables”--1)O16+1
(”O” indicates the subtraction of the integer.)
Example
[Writing the bit memory table from No.51 to No. 70]
Contentstobewrittentobit
memory
Changing to Bit data
Changing to Hexadecimal
(Remaining left most bit
!
0)
Data to be specified
ASCll code
68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
ON ON ONOFF ON ONOFFON ONOFFOFFONOFFOFFOFFOFFON ON
111011011001000011
F B 6 4 3000
46
F
30
0
30
0
30
0
2C
,
33
3
34
4
36
6
42
B
70 69
ON ON
11
To Next Page
Loading...
