Omron S8BA-24D24D120LF - Page 67

4-4 UPS operation mode settings
4 Check and start operation
S8BA-24D24D□□□LF
65
4
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(C)
(C)
(A) (D)
(C)
(C)
(B)
(B)
(B)
(C)
(C)
(C)
(C)
(B)
(B)
(B)
(B)
(B)
Enable beeper for error
only
Disable beeper
(default)
Disable auto restart
Enable test for all timings
(dafault)
Enable test for startup
only
Enable auto restart
(default)
Enable test for once
every four weeks only
Disable test for all
timings
Mode A (default)
Mode B
Auto restart setting
Display
current
setting
Enable beeper for all
timings
Beeper setting
Display
current
setting
Display
current
setting
Auto test setting
Display
current
setting
Auto restart mode
setting
(next page)
DC input
"Power" switch "OFF"�
(NO.2)
Operation (A): pressing the “Beep Stop/Test” switch and turn on the “Power” switch.
Operation (B): pressing the “Beep Stop/Test” switch below 1 second and then release it.
Operation (C): pressing the “Beep Stop/Test” switch 1 second or more and then release it.
Operation (D): turning off the “Power” switch.