Omron S8BA-24D24D120LF User Manual

4 Check and start operation
4-4 UPS operation mode settings
S8BA-24D24D□□□LF
68
(C)
(C)
(B)
(B)
(B)
(B)
(B)
(B)
(C)
(C)
(B)
(B)
(B)
(B)
(B)
(B)
BS signal delay time
setting
Display
current
setting
20%
90%
0% (Default)
(10% step)
10%
Delay 0 minute (default)
Delay 0.2 minutes
Delay 0.5 minutes
Delay 1 minute
Delay 2 minutes
Delay 10 minutes
(1 min. step)
Startup battery level
setting
Display
current
setting
(previous page)
(next page)
Operation (A): pressing the “Beep Stop/Test” switch and turn on the “Power” switch.
Operation (B): pressing the “Beep Stop/Test” switch below 1 second and then release it.
Operation (C): pressing the “Beep Stop/Test” switch 1 second or more and then release it.
Operation (D): turning off the “Power” switch.

Omron S8BA-24D24D120LF Specifications

General

Brand	Omron
Model	S8BA-24D24D120LF
Category	UPS
Language	English