181
Programming Device Operations for Tasks Section 4-4
Programming Console A task is handled as the entire program on the Programming Console. Access
and edit a program with a Programming Console by specifying CT00 to CT31
for a cyclic task or IT001 to IT255 for an interrupt task.
Note 1. A Programming Console cannot create new cyclic tasks.
2. The CJ-series CPU Units do not currently support I/O or external interrupt
tasks. Only IT001 to IT003 can be specified.
CLR
0: Cyclic task, 1: Interrupt task
Cyclic task No.?
Enter 00 to 31.
Write
Enter 000 to 255.
Interrupt task No.?
FUN
0
Write
1
CHG
00
To Next Page
Loading...
