Omron SYSMAC CS/CJ Series

311
Peripheral Servicing Priority Mode Section 6-9
Applicable Program Areas
Condition Flags
CS1-H, CJ1-H, and CJ1M CPU Units
IOSP(287) When executed, IOSP(287) disables peripheral servicing. Peripheral servic-
ing will remain disabled if IOSP(287) is executed when it is already disabled.
Symbol
Applicable Program Areas
Condition Flags
IORS(288) When executed, IORS(288) enables disables peripheral servicing that was
disabled with IOSP(287). Peripheral servicing will remain enabled if
IORS(288) is executed when it is already enabled.
Symbol
Applicable Program Areas
Condition Flags
Area Applicability
Block programming areas Yes
Step programming areas Yes
Subroutine programs Yes
Interrupt tasks No
Flag Label Operation
Error Flag ER Turns ON if EI(694) is executed in an interrupt task.
Area Applicability
Block programming areas Yes
Step programming areas Yes
Subroutine programs Yes
Interrupt tasks No
Flag Label Operation
Error Flag ER Turns ON if IOSP(287) is executed in an interrupt task,
and OFF otherwise
IOSP
Area Applicability
Block programming areas Yes
Step programming areas Yes
Subroutine programs Yes
Interrupt tasks No
Flag Label Operation
Error Flag ER Turns ON if IORS(288) is executed in an interrupt task.
IORS