105
Responses with Network Communications
@xxFA00C000
00xxxxxxxxxxxx
Node no. Header ICF RSV GCNT
Response code
Data (1,076 characters)
Command code
0000xx
SA2 SID
xxxx
xx
FCS
DNA
DA1
DA2 SNA SA1
Terminator
*
r
Response Code Format The bit format of the response code is shown below.
915 14 13 12 11 10 43210
1 Main code Subcode
Bit
1: Non-fatal error occurred.
1: Fatal error occurred.
Communications error occurred.
8
765
6-4-1 Response Code Descriptions
Main
code
Description Sub-
code
Meaning
00 Normal completion 00 ---
04 Not executable 01 All undefined command has been used.
02 An incorrect unit or version specification has been used.
10 Command format error 01 The command is longer than the max. permissible length.
02 The command is shorter than min. permissible length.
03 The designated number of data items differs from the actual number of
data items.
04 An incorrect command format has been used.
05 An incorrect header has been used.
11 Parameter error 01 A correct memory area code has not been used or Expansion Date
Memory is not available.
03 An incorrect beginning address has been used.
04 An incorrect word range has been designated.
05 The source and destination differ in access size.
06 A non-existing program no. has been specified.
09 The sizes of data items in the command block are wrong.
0B The response block is longer than the max. permissible length.
0C An incorrect parameter code has been specified.
20 Read not possible 02 The specified area is protected.
04 The corresponding data does not exist.
05 A non-existing program no. has been specified.
06 A non-existing file has been specified.
07 A verification error has occurred.
CV-mode Response Codes
Section 6-4
To Next Page
Loading...
Need help?
General
